TX-1xx Series Printer Operation Manual
~ 109 ~
10 Using Rechargeable Battery
For battery-powered models, 4 rechargeable batteries of AA size can be used.
Even without an external power supply, the printer can operate normally. The
printer supports nickel-metal hydride or nickel-chromium batteries with a single
cell capacity of 1500mAh ~ 2500mAh.
Note:
Not all models support battery power, please contact your supplier for details.
10.1 Install Rechargeable Battery
Please prepare 4 AA size rechargeable NIMH batteries, unscrew the battery
cover screw on the back of the printer and remove the battery cover, as shown
below:
To Next Page
Loading...