Beijing TX Series - User Login and Electronic Signature

TX-1xx Series Printer Operation Manual
~ 85 ~
Note: If you need to set user permissions, you must first set the administrator
password.
8.7 User Login and Electronic Signature
In order to prevent unauthorized operation of the printer, you can set a login
password for each user. Before using the printer, you must enter the login
password, otherwise you cannot use the printer. After the user enters the correct
login password, the printer can output the user name in the signature position of
the trailer.
➢ Preparation:
Please refer to Section 8.5 to set the administrator password first.
Now, you need to prepare an EXCEL table that contains each user's login
password and corresponding user name. This operation is the same as Section
8.4 "Code Input Method", except that the code is replaced by a fixed 6-digit