Beijing TX Series - Interface Setting

TX-1xx Series Printer Operation Manual
~ 104 ~
Item
Default
Options
Memo
Accumulate
Moisture…Lowest bit (right)
9.3 Interface Setting
This menu is used to set the communication parameters between the printer and
the scale. Note: The communication parameters of the printer must be consistent
with the scale. Incorrect settings will cause the printer to not work properly! The
printer has the function of automatically detecting and setting communication
parameters, please refer to Section “11.2 Communication Automatic Detection".
Item
Default
Options
Memo
Baud
300,600,1200,
2400,4800,
14400,9600,
19200,
38400,57600,
The communication rate, which
determines the communication
speed, must be consistent with
the scale setting.