Beijing TX Series - Page 111

TX-1xx Series Printer Operation Manual
~ 105 ~
Item
Default
Options
Memo
115200
Data bits
8Bits
7Bits / 8Bits
The number of data bits
contained in a frame of data,
must be consistent with the
scale setting.
Parity
None
None/ODD/EVEN
The bit used for verification,
must be consistent with the
scale setting.
Stop bits
1Stop
1Stop, 2Stop
The length of the bit indicating
the end of the data, must be
consistent with the scale
setting.
Handshake
None
None, DTR/CTS,
Xon / Xoff，
nDTR / CTS
Data handshake protocol, must
be consistent with the scale
setting.
Terminate
char
CR+LF
CR+LF, CR, LF,
WIN,
ETX,None
Indicates the end of data, which
must be consistent with the
scale setting.