Beijing TX Series - Page 112

TX-1xx Series Printer Operation Manual
~ 106 ~
Item
Default
Options
Memo
Data
output
mode
Output
once
Output once
Continuous
Output once：Applicable to
scales that press the print key
once and output data once.
Continuous：Applicable to scales
that continuous output.
Disable
Command
X
X，√
X：Normal operating mode
√：It is usually used to connect
instruments other than the
scale, such as a PH meter.
PRN
command
char
Up to 16
hexadecimal
characters
Define the command to read
the weight data in hexadecimal
format, for example: set to
500D0A, then press the print
key will issue "P CR LF", please
refer to Section "11.3 Custom
Print Command".