Beijing TX Series - Page 113

TX-1xx Series Printer Operation Manual
~ 107 ~
Item
Default
Options
Memo
TARE
command
Up to 16
hexadecimal
characters
Define scale tare command,
hexadecimal format, for
example: set to 540D0A, "T CR
LF" command will be issued to
scale during "automatic tare"
operation, please refer to
Section "11.4 Custom Tare
Command".
Character
Set
ASCII
ASCII
GB2312
Select character set
Data Filter
Please refer to Section "11.5
Data Filtering".
Data
Matching
Please refer to Section "11.6
Data matching".
Enable
Demo
Mode
X
X，√
√: When the [PRINT] key is
pressed, the printer simulates
receiving balance data for
function demonstration. For