TX-1xx Series Printer Operation Manual
~ 33 ~
⚫ Press [OK] key to confirm the input and return, the operation ends.
6.4 Set Operating Language
The printer provides two methods for setting the operating language:
➢ Enter the setup menu.
➢ Quick setting when booting.
For the first method, please refer to Section 9.2. The second method can select the
desired language simply and quickly even if the operator cannot understand the
current printer display language.
The following is the operation method:
Turn on the printer power, when the display shows the first screen, immediately
press the [BACK] key, the display shows the language selection list, as shown
below:
To Next Page
Loading...