TX-1xx Series Printer Operation Manual
~ 45 ~
Operation:
⚫ Press the [MODE] key and select “Weighing Mode”.
⚫ Put the sample into the scale, and after the data is stable, press the [PRINT]
key, the printer automatically outputs a complete report.
Memo：
⚫ If you want to modify the format of the header or trailer, please refer to
Section 8.2.
7.3 Multi Weighing Mode
This mode differs from the "weighing mode" in that it can output multiple data
in one report. The report style is as follows:
To Next Page
Loading...