1 695 301 979 2011-07-16| Beissbarth GmbH
Symbols used | MS 75 | 21MS 75 | 21 | 21
en
1. Symbols used
1.1 In the documentation
1.1.1 Warning notices - Structure and meaning
Warning notices indicate hazards and their consequen-
ces for the user or surrounding persons. Warning notices
also describe the measures for preventing these hazards.
The signal word has a crucial importance. It indicates
the probability of occurrence and the severity of the
hazard in case of non-compliance:
Signal
word
Probability of
occurrence
Severity of danger
if instructions not
observed
DANGER
Immediate impending
danger
Death or severe
injury
WARNING
Possible impending
danger
Death or severe
injury
CAUTION
Possible dangerous
situation
Minor
injury
Below you will see an example of the “Live parts”
warning notice by way of example, with the signal word
DANGER:
DANGER – Exposure of live parts on open-
ing the MS 75!
Risk of (fatal) injury or heart failure from elec-
tric shocks on contact with live components
(e.g. master switch, printed circuit boards).
¶ Work on electrical installations or equip-
ment is only to be performed by qualified
electricians or trained personnel under the
guidance and supervision of an electrician.
¶ Disconnect MS 75 from the mains before
opening.
1.1.2 Symbols in this documentation
Sym-
bol
Designation Explanation
!
Attention Warns about possible property damage.
i
Information Practical hints and other
useful information.
1.
2.
Multi-step op-
eration
Instruction consisting of several steps
e
One-step oper-
ation
Instruction consisting of one step.
Intermediate
result
An instruction produces a visible inter-
mediate result.
"
Final result There is a visible final result on comple-
tion of the instruction.
1.3 Additional adhesive tags
! Respect all the safety instructions and danger war-
nings on the products and keep the related tags in
full readable conditions!
Mains tension
Danger of electrical shock when touching the
parts of the electrical system.
Wheel unlocking
Danger of crushing in the area close to the
wheel locking assembly.
Working arm fitting
Danger of crushing in the area close to the
working arm.
1.2 On the product
! Observe all warning notices on products and ensure
they remain legible!
To Next Page
Loading...