1 695 301 979 2011-07-16| Beissbarth GmbH
22 | MS 75 | User informationen
2. User information
2.1 Important notes
Important information on copyright, liability and war-
ranty provisions, as well as on equipment users and
company obligations, can be found in the separate
manual "Important notes on and safety instructions for
Beissbarth Tire Equipment". These instructions must be
carefully studied prior to start-up, connection and opera-
tion of the MS 75 and must always be heeded.
2.2 Safety instructions
All the pertinent safety instructions can be found in the
separate manual "Important notes on and safety instruc-
tions for Beissbarth Tire Equipment". These instructions
must be carefully studied prior to start-up, connection
and operation of the MS 75 and must always be heeded.
2.3 Electromagnetic compatibility (EMC)
The MS 75 is a class A product as per EN 61 326.
3. Product description
3.1 Designated use
MS 75 is a modern tire changer for mounting and de-
mounting of truck, bus, industrial vehicles, agricultural
and earthwork vehicles tires.
i MS 75 has to be used exclusively for the specified
purpose and only in the functioning scope shown in
these instructions. Any other use different from that
specified has to be considered improper and there-
fore not allowed.
i The manufacturer is not liable for any damage
caused by improper use.
3.2 Requirements
i MS 75 has to be installed on an even surface made
of concrete or similar materials, and has to be firmly
anchored. A pneumatic connection is requested.
3.3 Delivery specification
Denomination Order code
MS 75
Bead lifting lever
1 695 300 094
Rim pliers
1 695 300 099
3.4 Special accessories
Denomination Order code
Nylon protections
1 695 400 139
Clamps (2 pieces)
1 695 300 098
Bead wires and clamps lever
1 695 102 683
Tubeless roller
1 695 300 102
56" extension for locking jaws
1 695 301 710
To Next Page
Loading...