BHT-206L4-MM-1
5-00-00
25 FEB 2011 Rev. 13 Page 87
ECCN EAR99
Chapter 96 d. Wiring and electrical components for condition and
security.
Chapter 53 e. Structure for corrosion, cracks, and condition.
CONTROLS
Chapter 67 1. Verify minimum friction of collective control and readjust as
required.
2. Verify minimum friction of cyclic control and readjust as
required.
3. Verify minimum friction of control pedals and readjust as
required.
Chapter 96 ELECTRICAL
1. Remove battery and recondition in accordance with
BHT-ALL-SPM and manufacturer’s service manual.
FUSELAGE
Chapter 52 1. Inspect latches on crew doors for correct adjustment.
2. Inspect latches on passenger doors, and baggage door for
correct adjustment.
PYLON AREA
SWASHPLATE ASSEMBLY
Chapter 62 1. Verify and adjust swashplate tilt friction as required.
2. Value must be between 15 to 32 pounds (67 to 142 N). If
out of limits, adjust to 15 to 32 pounds (67 to 142 N) and check
again.
5-29. 300-HOUR INSPECTION (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...
Need help?
General
