Bell 206L - 60-Month Inspection

BHT-206L4-MM-1
5-00-00
Export Classification C, ECCN EAR99
SCHEDULED INSPECTIONS
5-36. 60-MONTH INSPECTION
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
DATE: __________________W.O. _____________________
FACILITY: __________________________________________
HELICOPTER S/N: ___________________________________
REGISTRY NO.: _____________________________________
TOTAL TIME:_______________________________________
SIGNATURE:________________________________________
BHT-206L4-MM
BHT-206L-CR&O
FREEWHEEL ASSEMBLY
NOTE
This inspection applies to helicopters equipped with
freewheel assembly 406-040-500-143 (or
subsequent).
Do this inspection if an overhaul of the applicable
freewheel assembly has not been accomplished in
the last 60 months.
1. Remove the freewheel assembly.
2. Disassemble the freewheel assembly.
NOTE
Do not do a non-destructive inspection. It is not
necessary to remove paint from the parts.
3. Examine the parts of the freewheel assembly for condition.
4. Restore the surface finish of the damaged part(s), as
applicable.
5. Assemble the freewheel assembly.
6. Install the freewheel assembly.
7 JUN 2013 Rev. 18 Page 111/112