BHT-206L4-MM-1
5-00-00
Page 28 Rev. 24 18 JUL 2019
Export Classification C, ECCN EAR99
Chapter 96 8. Examine the primary electrical ground connection in
engine pan area for condition and security
POWER PLANT
Rolls-Royce 250-C30
Series Operation and
Maintenance Manual,
14W2
1. Perform engine inspection per the applicable Rolls-Royce
Operation and Maintenance Manual.
Chapter 71 2. Examine engine inlet bellmouth for obstruction and general
condition.
3. Examine engine compartment hardware for security of
attachment.
4. Examine engine for evidence of fuel or oil leaks.
5. Examine all flexible and rigid lines for condition and
security.
a. Pay particular attention for chafing damage and kinked
lines.
6. Examine exhaust stack for condition and security.
7. Examine all engine-mounted accessories for condition and
security.
Chapter 75 8. Examine the engine anti-ice solenoid valve for condition
and security.
Chapter 76 9. Inspect fuel control lever bolt hole and bolt for wear.
Replace parts as required.
10. Deleted
11. Deleted.
Chapter 76 12. Examine engine controls for condition and security.
13. Verify operation of engine N
1
control as follows:
a. Ensure proper throttle friction.
5-17. 100-HOUR AIRFRAME PROGRESSIVE INSPECTION — EVENT NO. 2 (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER