BHT-206L4-MM-1
5-00-00
Page 138 Rev. 13 25 FEB 2011
ECCN EAR99
If a nut is improperly torqued, remove and check tare
torque, and replace as required. Recheck torque at
next 100 hours.
2. Torque check transmission top case stud nuts 130 to 160
inch-pounds (15 to 18 Nm).
BHT-ALL-SPM 3. Touch up paint finish as required.
5-48. 100 HOURS AFTER EACH INSTALLATION (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER
To Next Page
Loading...
Need help?
General
