Bematech BR200BT User Manual

Handy Wireless Scanner
7
USER MANUAL
Radio Communication Host Type
This scanner support three radio communication types:
 Dongle mode
 SPP master/slave mode
 HID mode
Dongle Host Mode
The scanner communicates with the host through the dongle. One dongle can be used to
connect multiple scanners.
Typically, scanner and dongle in the same delivery box are paired in factory. As soon as
both are powered on, they should find and connect to each other immediately.
However, under special circumstance that the scanner and the dongle are not paired with
the dongle, please follow instructions in later chapters to pair the dongle.
SPP Master/SPP Slave Mode
The scanner communicates with the host through wireless connection.
Please see Wireless Mode for detail operation information.
HID Mode
The scanner communicates with the smart phone through wireless HID connection.
Please see BT HID mode for detail operation information

Bematech BR200BT Specifications

General

Battery voltage	3.7 V
Battery capacity	850 mAh
Power source type	Battery
Type	Handheld bar code reader
Wavelength	617 nm
Sensor type	CCD
Scanner type	1D
Read rate (max)	330 reads/s
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Codabar, Code 128, Code 32, Code 39, Code 93, ITF-14, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Product color	Black
LED indicators	Yes
Housing material	-
International Protection (IP) code	IP43
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	62 mm
Width	147 mm
Height	114.5 mm
Weight	210 g