Bematech BR200BT User Manual

Handy Wireless Scanner
47
USER MANUAL
Start Of Configuration
The Symbologies
Codabar Parameter Setting
Barcode
Value
Barcode Label
Description
RC02
Codabar enable
RD02
Codabar disable
CB05
Codabar start/stop character transmission－none
CB06
Codabar start/stop character transmission－A,B,C,D
CB07
Codabar start/stop character transmission－
DC1~DC4
CB08
Codabar start/stop character transmission－
a/t,b/n,c/*,d/e
CB09
Codabar maximum length setting
CB10
Codabar minimum length setting
SET
Confirm to save this setting (required for reading full
ASCII table and length setting)
End Of Configuration

Bematech BR200BT Specifications

General

Battery voltage	3.7 V
Battery capacity	850 mAh
Power source type	Battery
Type	Handheld bar code reader
Wavelength	617 nm
Sensor type	CCD
Scanner type	1D
Read rate (max)	330 reads/s
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Codabar, Code 128, Code 32, Code 39, Code 93, ITF-14, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Product color	Black
LED indicators	Yes
Housing material	-
International Protection (IP) code	IP43
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	62 mm
Width	147 mm
Height	114.5 mm
Weight	210 g