Bematech BR200BT User Manual

Handy Wireless Scanner
8
USER MANUAL
Scanner USB online to Host
The scanner provides other ways for you to connect to the host. When the
radio communication is not available, the scanner can be connected to transmit data via
USB Online mode. Please see USB Online Mode for detail operation information.
USB Online Mode
The scanner connects directly to a USB host to recharge and transmit data.
Visible Indicators
Scanner LED
Please see the following for the operational indication of the scanner.
LED Status
Indication
Blue flashing
Waiting for radio connection (flash time
0.5s : 0.5s).
Blue fast flashing
Radio connecting.
Blue slow flashing
Device connected (flash time 0.03s : 3s).
Blue flash once
A barcode was decoded successfully
Blue fast flashing
Data transmission
Green flashing
Charging mode
Steady green
Battery fully charged
Steady red
Programming mode
Red flashing slow (with
continuous beep sound)
Low battery warning
Red flash twice (with 2 beep
sound)
Very low battery warning

Bematech BR200BT Specifications

General

Battery voltage	3.7 V
Battery capacity	850 mAh
Power source type	Battery
Type	Handheld bar code reader
Wavelength	617 nm
Sensor type	CCD
Scanner type	1D
Read rate (max)	330 reads/s
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Codabar, Code 128, Code 32, Code 39, Code 93, ITF-14, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Product color	Black
LED indicators	Yes
Housing material	-
International Protection (IP) code	IP43
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	62 mm
Width	147 mm
Height	114.5 mm
Weight	210 g