Bematech BR200BT User Manual

Handy Wireless Scanner
9
USER MANUAL
Dongle LED
Please see the following for the operational indication of the scanner.
LED Status
Indication
Blue flashing
Dongle is detected by the host,
communication not yet established
Steady blue
Dongle is connected to the host
Blue flash once
Data transmission
Steady red
Dongle is plugged into the host but not
detected by the host or dongle is in the
update mode
Sound Indicators
When the scanner is in operation, it provides audible feedback. The beeps indicate the
status of the scanner.
Beep
Indication
A long beep
Power on scanner.
One beep
A barcode has been successfully decoded and data is
either transfer to the host or saved in the memory.
1 high - low - high beeps
Scan dongle pair barcode.
Four short medium beeps
Data communication failed or out of range.
Intermission medium-low
beeps
Low battery warning.
1 short medium – low beeps
Scanner is power down.
1 long high – medium beeps
Enter programming mode.
1 long medium - medium
beeps
Exit Programming mode.

Bematech BR200BT Specifications

General

Battery voltage	3.7 V
Battery capacity	850 mAh
Power source type	Battery
Type	Handheld bar code reader
Wavelength	617 nm
Sensor type	CCD
Scanner type	1D
Read rate (max)	330 reads/s
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Codabar, Code 128, Code 32, Code 39, Code 93, ITF-14, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Product color	Black
LED indicators	Yes
Housing material	-
International Protection (IP) code	IP43
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	62 mm
Width	147 mm
Height	114.5 mm
Weight	210 g