Bematech BR200BT User Manual

Handy Wireless Scanner
62
USER MANUAL
Start Of Configuration
Barcode
Value
Barcode Label
Description
UE23
Transmit EAN-8 check digit enable
UE24
Transmit EAN-8 check digit disable
UE25
Transmit EAN-13 check digit enable
UE26
Transmit EAN-13 check digit disable
UE27
Transmit UPC-A leading character enable
UE28
Transmit UPC-A leading character disable
UE30
Add-on format with separator
UE31
Add-on format without separator
UE60
EAN-13 country code first “0” can be transmitted
UE61
EAN-13 country code first:”0” can’t be transmitted
UE66
EAN-13 with first 0 ID code same as “UPC-A”
UE67
EAN-13 with first 0 ID code same as “EAN-13”
DC10
UPC-A data redundant check=off
DC11
UPC-A data redundant check=1
End Of Configuration

Bematech BR200BT Specifications

General

Battery voltage	3.7 V
Battery capacity	850 mAh
Power source type	Battery
Type	Handheld bar code reader
Wavelength	617 nm
Sensor type	CCD
Scanner type	1D
Read rate (max)	330 reads/s
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Codabar, Code 128, Code 32, Code 39, Code 93, ITF-14, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Not supported
Standard interfaces	Bluetooth
Connectivity technology	Wireless
Product color	Black
LED indicators	Yes
Housing material	-
International Protection (IP) code	IP43
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	62 mm
Width	147 mm
Height	114.5 mm
Weight	210 g