Safety instructions
16
IRDH275_D00122_02_M_XXEN/10.2016
2.4 Intended use
The ISOMETER
®
is intended for:
• monitoring the insulation resistance of IT systems
Any other use, or any use which goes beyond the foregoing, is deemed to be
use other than for the intended purpose. The Bender companies shall not be
liable for any losses or damage arising therefrom.
Use for the intended purpose also includes
• compliance with all information in the operating instructions, and
• compliance with test intervals.
In order to meet the requirements of the applicable standards, customised pa-
rameter settings must be made on the equipment in order to adapt it to local
equipment and operating conditions. Please heed the limits of the range of
application indicated in the technical data.
Any use other than that described in this manual is regarded as improper.
To Next Page
Loading...
Need help?
General
