Operation and setting
43
IRDH275_D00122_02_M_XXEN/10.2016
6.1.2 Display in the menu mode
6.1.3 Function keys
Two functions are assigned to each function key. In addition to the basic func-
tion marked with a circle, all the keys allow navigation within the menu.
Pressing the INFO key provides the following information
without opening the menu:
• Device name, firmware version
• Response values Alarm 1 and Alarm 2
• Leakage capacitance C
e
(only indication if insulation
resistances > 20 kΩ)
• Setup status (for details refer to the table of the status
numbers on page 83)
• COM-Setup (IRDH275 bus address)
Please have the details above on hand if you have a problem and if you con-
tact Bender for technical questions.
Parameter change is
permitted
Parameter change is blocked,
enabling by a password
To Next Page
Loading...
