Bender ISOMETER IRDH275 - Standards, Approvals, and Certifications

Technical data IRDH275(B)
77
IRDH275_D00122_02_M_XXEN/10.2016
8.2 Standards, approvals and certifications
The ISOMETER
®
was designed under consideration of the following standards:
- DIN EN 61557-8 (VDE 0413-8)
- IEC 61557-8:2007 + Corrigendum
- IEC 61326-2-4
- DIN EN 60664-1 (VDE 0110-1)
- DIN EN 60664-3 (VDE 0110-3)
- ASTM F1669M-96(2007)
- ASTM F1207M-96(2007)