2
14,000 POUND CAPACITY, COMMERCIAL GRADE
FOUR POST OPEN FRONT ALIGNMENT AUTO / TRUCK Lift
This instruction manual has been prepared especially for you.
Your new Lift is the product of over 40 years of continuous research, testing and development;
it is the most technically advanced Lift on the market today.
READ THIS ENTIRE MANUAL BEFORE
INSTALLATION & OPERATION BEGINS.
RECORD THE LIFT AND
POWER UNIT INFORMATION WHICH IS LOCATED
ON THE SERIAL NUMBER DATA PLATES ON THE Lift
AND ON THE POWER UNIT
Power Unit Model # _____________
Power Unit Date Of Mfg. _____________
Power Unit Serial # _____________
Maximum Operating
Hydraulic Pressure 2,950 PSI
This information is required when
calling for parts or warranty issues.
PRODUCT WARRANTY
Our comprehensive product warranty means more than a commitment to you; it’s also a commitment to the value of your
new BendPak Lift. For full warranty details and to register your new Lift contact your nearest BendPak dealer or visit:
http:/ /www.bendpak.com/support/warranty/
NOTE:
Every effort has been taken to ensure complete and accurate instructions have been included in this manual, however, possible product
updates, revisions and or changes may have occurred since this printing. BendPak Ranger reserves the right to change specifications
without incurring any obligation for equipment previously or subsequently sold. Not responsible for typographical errors.
California Proposition 65. This product can expose you to chemicals including styrene and vinyl chloride which are on the list of
over 900 chemicals identied by the State of California to cause cancer, birth defects or reproductive harm. Always use this product in
accordance with BendPak’s instructions. For more information, visit www.p65warnings.ca.gov.
To Next Page
Loading...
