BendPak LR-60P - Page 17

17
5. If the specic vehicle lift points are not identied, or if
the vehicle has additional or uniquely positioned payload,
have a qualied person calculate the vehicle center of
gravity or have the vehicle center of gravity determined at
a vehicle scale. Load the vehicle with the enter of gravity
midway between adapters.
WARNING!
DO NOT Park wheels directly on lift pads.
6. Set parking brake or use wheel chock to hold vehicle
in position.
Make sure vehicle is neither front nor rear heavy and select the proper conguration for the vehicle to be
lifted as shown below. Center of balance should be midway between adapters and centered over the lift.