BenQ PU9730 - Selecting an input source

English
27
Selecting an input source
The projector can be connected to multiple equipment at the same time. When the projector
isrstturnedon,itwillattempttoreconnectwiththeinputsourcewhichwasinusewhenthe
projector was last shut down.
The Input Source can be selected from the projector's control panel or from the remote control.
Refer to the following guide to select the desired input source
1. Press INPUT key on the remote control or control panel to display SOURCE Menu.
2. Select your desired input source via
▲
/
▼
key.
3. PressENTERkeytoconrmtheinputselection,itwilltakefewsecondstodetectthedesired
input signal and display the projected image.
Press RETURN key to projected image if you want to keep current input source.