BenQ PU9730 - Alert Mail Setup

English
66
Alert mail setup
TheprojectorcansendalertmessageswithEmailtopredenedusers.Makethefollowingsettings
before enabling this function:
SMPT Sever : Set up name of SMTP server for the projector's sending reminder email.
Port : Set up transmission port
User Name : Set up user name for the projector's sending reminder email through SMTP
server.
Password : Set up user password.
E-mail Alert : Enable or disable E-mail Alert function.
From : Set up sender's email address.
To : Set up recipient's email address.
CC : Set up CC recipient's email address.
Projector Name : Set up projector name or ID
Location : Set up installation location of projector.
Apply : Accept settings.Press this button to save the changes made.
Send Test Mail : Send test email to validate your settings. The reminder email is sent only in
the event of a projector error. Press this button to validate email settings
after setup is completed.