BenQ W1050 - Page 49

Operation 49
FUNCTION DESCRIPTION
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will reset to default: Aspect Ratio,
Wall Color, Image Position, Overscan Adjustment, PC
Tuning, 3D, Language, Background Color, Splash Screen,
Auto Off, Direct Power On, Menu Settings, Auto Source
Search, HDMI Settings, Baud Rate, Test Pattern, Closed
Caption, Quick Cooling, High Altitude Mode and Key
Lock.
Information
Source
Shows the current signal source.
Picture Mode
Shows the selected mode in the Picture menu.
Resolution
Shows the native resolution of the input signal.
Color System
Shows input system format RGB or YUV.
Lamp Usage Time
Displays the number of hours the lamp has been used.
3D Format
Shows the current 3D mode.
Firmware Version
Shows firmware version.
Basic menu (without signal)