Operation
48
Description of each menu
• The default values listed in this manual, especially on pages 48-57, are for
reference only. They may vary between the projectors due to the continuous
improvement to the products.
FUNCTION DESCRIPTION
Wall Color
Corrects the projected picture’s color when the projection
surface is not white. See "Using Wall Color" on page 34 for
details.
Projector
Position
The projector can be installed on a ceiling or behind a screen, or
with one or more mirrors. See "Choosing a location" on page 15
for details.
Test Patternn
Selecting On enables the function and the projector displays the
grid test pattern. It helps you adjust the image size and focus and
check that the projected image is free from distortion.
Auto Source
Search
See "Switching input signal" on page 30 for details.
Menu Type
Selects a Basic or Advanced menu type.
HDMI Range
Selects an input source type for the HDMI signal.
Auto
Enables the auto selection of HDMI format.
Full
Selects RGB full range for PC signal.
Limited
Selects RGB limited range for video signal.
Reset Lamp
Timer
See "Resetting the lamp timer" on page 66 for details.
Basic menu (without signal)
To Next Page
Loading...
