Bernard Controls AQ Logic Series User Manual

English
50
Connecting to your actuator
Once account is confirmed, your smartphone is ready to connect to
your actuators. Connection to actuators is achieved with Bluetooth
®
.
1. Start the App and log in your account.
2. Once logged, App will start to scan for actuators nearby.
3. If the desired actuator is found, select it.
If not, retry or scan the actuator QR code on the sticker (see
§ 2.1.1) or enter its serial number.
> or
4. Check that you are connected to the correct actuator (the 2
LEDs in front of the actuator should blink and the Bluetooth
icon on the screen has between +), then enter Access code.
>

Bernard Controls AQ Logic Series Specifications

General

Brand	Bernard Controls
Model	AQ Logic Series
Category	Controller
Language	English