My BERNINA
18
Illustration Name Purpose
Height compensating tool To level an angled position of
the presser foot sole when
sliding over thick seams.
Selection of needles For any common applications.
Seam guide, right To align regular seam distances.
Screwdriver Torx, gray To change the needle.
Screwdriver red (slot) To loosen and tighten slotted
screws.
Angular Torx wrench Torx To open the headframe.
Brush/Needle Inserter To clean the feed dog and the
looper area.
Sewing machine oil To oil the machine.
Power cable To connect the machine with the
power supply system.
Foot control To start and stop the machine.
To control the sewing speed.
To Next Page
Loading...
