Bernina 740 - Calibrating the Display; Back to Basic Settings; Deleting User Data

Setup Program
52
Calibrating the display
Please find further information on this topic in the chapter attachment below troubleshooting at the end of
the instruction manual.
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Calibrate Screen».
> Touch the crosses in sequence using the touchscreen pen.
Back to basic settings
ATTENTION: Using this function will delete all individually made settings.
> Tap «Setup Program».
> Tap «Machine Settings».
> Tap «Factory Setting».
> Tap the «Default setting machine», confirm and start the machine again.
Deleting user data
Patterns which are not needed anymore can be deleted to create space for new motifs.
> Tap «Setup Program».
> Tap «Machine Settings».