Bernina 740 - Reinforced Darning, Automatic; Finishing Edges

Practical stitches
81
6.10 Reinforced darning, automatic
The Reinforced darning programNo.23 is particularly suitable for quick darning of worn areas or tears. The
Reinforced darning program
No.23 replaces the longitudinal threads in all fabrics.
If the Darning Program does not cover the whole worn or damaged area, it is recommended to
reposition the work and the sew the Darning Program again. The length is programmed and can be
repeated as often as desired.
> Fit the Buttonhole foot with slide#3A.
> Tap «Practical Stitches».
> Select Reinforced darning programNo.23.
> Hoop light-weight materials in the round embroidery hoop (optional accessory).
– The darning area stays evenly taut and cannot be distorted.
> Start sewing top left.
> Sew the first row.
> Stop the machine.
> Push the button «Quick Reverse».
– The darning length is programmed.
> Finish sewing the Darning Program.
– The machine stops automatically.
6.11 Finishing edges