Sewing preparation
30
Attaching the knee lifter of the Free Hand System
The lateral position of the knee lifter can be adjusted by your local BERNINA Dealer if required.
> Insert the knee lifter into the opening at the front side of the machine.
> Adjust the sitting height so that the knee lifter can be operated with the knee.
Fixing the touchscreen pen
> Store the touchscreen pen at the magnet holder.
Switching the machine on
> Set the Power Switch to «I».
2.4 Foot control
Regulating the speed via the foot control
Via the foot control the speed can be adjusted infinitely variable.
> Press the foot control down carefully to start the machine.
> To sew faster, press the foot control harder.
To Next Page
Loading...
