Bernina 740 - Darning and Edge Finishing

Practical stitches
78
6.7 Sewing Triple Zigzag
For firm materials such as denim, deckchair covers, awnings or frequently washed items. Finish raw edges
first.
> Fit the Reverse Pattern Foot#1C/1D.
> Tap «Practical Stitches».
> Select Triple zigzagNo.7.
6.8 Manual darning
Used for darning holes or worn areas in all fabric types.
If the thread is lying on top and a poor stitch formation results, slow down the movement of the sewing
project. If there are knots on the wrong side of the fabric, move the sewing project faster. When the thread
breaks, guide the sewing project more consistently.
> Fit the Darning Foot#9.
> Tap «Practical Stitches».
> Select Straight stitchNo.1.
> Lower the feed dog.
> Attach the Slide-on Freearm Extension Table.
> Hoop the sewing project in the round embroidery hoop (optional accessory).
– The darning area stays evenly taut and cannot be distorted.