Bernina 740 - Automatic Darning

Practical stitches
80
> Sew another loose row.
6.9 Automatic darning
Simple darning programNo.22 is particularly suitable for quick darning of worn areas or tears. It is
recommended to use fine material as a backing for the worn and damaged areas or to stick on an adhesive
interlining. The Simple darning program
No.22 replaces the longitudinal threads in all fabrics. If the fabric
becomes distorted, correct with the Balance.
> Fit the Reverse Pattern Foot#1C or Buttonhole foot with slide#3A.
> Tap «Practical Stitches».
> Select Simple darning programNo.22.
> Hoop light-weight materials in the round embroidery hoop (optional accessory).
– The darning area stays evenly taut and cannot be distorted.
> Start sewing top left.
> Sew the first row.
> Stop the machine.
> Push the button «Quick Reverse».
– The length is programmed.
> Finish sewing the Darning Program.
– The machine stops automatically.