§ Inactive - Z Position is between 0° and 180°
o Safe - Provides information to the machine related to color change operations.
§ Active - Z Position is at Head Up (27°)
§ Inactive - Z Position is not at Head Up
· Trimmer
o Shows the state of the trimmer sensor.
· Grabber
o Shows the state of the grabber sensor.
· Thread Feed
o Shows the state of the thread feed sensor.
Status Log
The status log shows the latest captured action of the machine.
Tapping this will open the status log and display a history of actions along with timestamps.
To Next Page
Loading...