Bernina E 16 PRO - Loading a Design

49
8. Loading a Design
Your embroidery machine can hold a large number of designs in the touchscreen panel.
Designs can also be loaded from USB ash drives or from local storage.
Supported File Types
Your embroidery machine will support the following embroidery design le types:
· OFM - version 9 and later
o can contain color information
o can contain explicit trims
o versions older than 9 are not supported.
· ATRX
o can contain color information
o can contain explicit trims
· EXP
o requires additional hidden les to store color information
o can contain explicit trims but may rely on a jumps count to trim conversion
· DST
o requires jumps count to trim conversion to create trims
Loading a Design
To load a design, you will need to:
1. Navigate to a Design
a. To begin, tap on theDesign Sourcefrom which you would like to load the design.
Tapping on any of these sources will take you to a design browsing screen of the designs
contained within.