6. Sewing a Design
Here is a general checklist for sewing a design.
· Load A Design
· Set the Color Sequence
· Select the Hoop
· Set the Speed
· Adjust Acti-Feed Settings for Fabric
· Hoop and Product
· Load Hooped Product onto the Machine
· Adjust Placment and Orientation in Hoop
· Adjust Presser Foot Height
· Trace the Design
If you have done all of the above, you are ready to press the start button and watch your design sew.
After the Design is Sewn
After the design is complete, remove the hoop from the machine by gently lifting the spring
clips and pulling the hoop free of the hoop arms.
Before giving the garment to the customer, remove the stabilizer, hoop rings, and any toppings used.
To Next Page
Loading...