4.1. Cart Assembly
The cart consists of the items assembled as shown.
Tool Required
· 4mm hex wrench (like the one included in the machine operator's kit)
Prior to assembly of the art, place cardboard or a blanket on the oor to prevent damaging cart parts.
Assembly
Assembly of the cart is easiest on the oor. If you are concerned with marking up the cart or
oor, begin by placing down a large piece of cardboard or a blanket.
The assembly of the larger pieces may be easier with two people. One person can hold while the other
attaches. It isn't necessary, but it can make assembly smoother.
To Next Page
Loading...