The status bar will change to a progress bar as a design is sewn. It will ll in from at to dimensional as it
nishes sewing.
Machine Status
The status bar will also change colors depending on the machine's state. Additional information may appear
as needed. This would include.
· Silver
o The machine is ready to be interacted with, and a design can be loaded
· Green
o Machine is running
· Amber
o The machine was stopped by the user.
o Color sequence commands like "Applique" or "Pause".
· Red
o Hoop limits are exceeded.
o Errors such as communication, tracking, or other critical machine errors have occurred.
o E-Stop is engaged.
Color Sequence Bar
Just below the status bar lies the color sequence bar. This bar is a visual representation of the color sequence.
As the status bar lls in with progress, the dimensional progress display above lines up with the color blocks
below.
Sewing a Design
Load Design
Load Design allows you to browse for a design that you would like to load to the machine and prepare for
embroidery.
This also allows you to manage the embroidery designs on your machine or ash drives.
To Next Page
Loading...