· Rotate plus 10°
· Rotate plus 5°
· Rotate plus 1°
· Rotate plus 0.1°
· or
· Rotate minus 20°
· Rotate minus 10°
· Rotate minus 5°
· Rotate minus 1°
· Rotate minus 0.1°
Current Z Position
This displays the current Z position of the machine. It will update whenever the rotation changes.
Release / Engage Z
The motors controlling the Z shaft can be disengaged allowing the Z position to be subject to gravity and
manual manipulation. Tap the button to release or engage Z.
· Z Engaged - The Z motor is engaged and the Z position is being held by the machine.
· Z Released - The Z motor is disengaged and the Z position can be changed manually.
Status Log
The status log shows the latest captured action of the machine.
Tapping this will open the status log and display a history of actions along with timestamps.
To Next Page
Loading...