Bernina Q Series User Manual

Setting up the machine
22
> Place the spool holder on the machine such that both spool pins (1) are positioned in front of the thread
guide (2).
1
2
> Slide the spool pin forward until it lies against the machine housing.
> Tighten the screw (1).
1
2.3 Programming the handle buttons
There are 2 buttons on each handle that can be programmed with different functions.
> Switch on the machine and wait until it starts up.
> To program the buttons, repeat the following steps for all buttons.

Bernina Q Series Specifications

General

Color Touch Screen	Yes
LED Lighting	Yes
Connectivity	USB
Series	Q Series
Brand	Bernina
Automatic Thread Cutter	Yes
Speed Control	Yes
Stitch Regulation	Yes
LCD Screen	Yes
Warranty	Varies by region, consult your local Bernina dealer.