Bernina Q Series User Manual

Setting up the machine
24
Using the single stitch/securing function with the handles
The «Single stitch/securing» funciton combines the following functions:
• Pull the bobbin thread upward with a single stitch.
• Sew a programmed number of securing stitches.
Prerequisite:
• A button of the handles is programmed with «Single stitch/securing». (see page22)
> To pull the bobbin thread up with a single stitch, briefly press down the button programmed with the
function.
> To sew the programmed number of securing stitches, press down the button programmed with the
function until the programmed securing stitches have been stitched.
2.4 Presser foot
Raising and lowering the presser foot
On the sewing screen With handle button
or or Tap.
Press the button programmed with «Raising/
lowering the presser foot». (see page22)
Changing the presser foot
> Raise the needle.
> Raise the presser foot.
> Switch the machine off.
> Raise the clamping lever.
> Pull the presser foot away in a downward direction.
> Insert a new presser foot into the bracket from below.
> Press the clamping lever down.

Bernina Q Series Specifications

General

Color Touch Screen	Yes
LED Lighting	Yes
Connectivity	USB
Series	Q Series
Brand	Bernina
Automatic Thread Cutter	Yes
Speed Control	Yes
Stitch Regulation	Yes
LCD Screen	Yes
Warranty	Varies by region, consult your local Bernina dealer.