Bernina Q Series User Manual

Errors and faults
66
8 Errors and faults
8.1 Error messages
Error messages Explanation Remedy
The needle is not in top position. > Press the handwheel inward and turn counterclockwise.
Upper thread used up. > Fit and thread a new upper thread cone.
Response from bobbin thread
monitor.
> Check bobbin thread and wind up if necessary.
Too much fabric under the
presser foot.
> Reduce the fabric thickness.
Needle threader not in top
position.
> Push the needle threader all the way to the top.

Bernina Q Series Specifications

General

Color Touch Screen	Yes
LED Lighting	Yes
Connectivity	USB
Series	Q Series
Brand	Bernina
Automatic Thread Cutter	Yes
Speed Control	Yes
Stitch Regulation	Yes
LCD Screen	Yes
Warranty	Varies by region, consult your local Bernina dealer.