Bernina Q Series User Manual

Settings
46
3.6 Adjusting the needle laser pointer
Please note: The needle laser pointer is available as optional accessory. The settings for the needle laser
pointer only apply if the needle laser pointer is installed. Refer to the needle laser pointer manual for more
information.
> Tap «Home».
> Tap «Setup Pogram».
> Tap «Needle laser pointer settings».
1
2
> Switch the needle laser pointer on or off (1).
> Adjust the brightness of the needle laser pointer (2).
3.7 Setting up monitoring functions
If the monitoring functions are switched on, the machine stops as soon as the upper thread breaks or the
bobbin is empty.
> Tap «Home».
> Tap «Setup Pogram».
> Tap «Monitoring functions».
1
2

Bernina Q Series Specifications

General

Color Touch Screen	Yes
LED Lighting	Yes
Connectivity	USB
Series	Q Series
Brand	Bernina
Automatic Thread Cutter	Yes
Speed Control	Yes
Stitch Regulation	Yes
LCD Screen	Yes
Warranty	Varies by region, consult your local Bernina dealer.