BestCode NExT 82 - Page 55

BestCode Next Series 8 Technical Manual October 2022 Page 41 of 290
Print Mode
Normal
The printer will produce 1 print when a print trigger is provided.
Advanced
The Advanced Print Mode allows the ultimate flexibility in coding operations. It permits the user to combine
AutoPrinting mode, Repeat or AutoSelect Print Modes. Features can be enabled or disabled independently.
AutoPrint
Enables or Disables the AutoPrint function for this
message.
Off / On
Delay
Increases or decreases the time between receiving a
print trigger and print occuring.
0-4,000,000,000
Pitch
Specifies the delay between repeated prints.
0-4,000,000,000
Select Code
Allows Auto-Select function to be enabled. Remote
changes to the printing message would begin printing
immediately during AutoPrint mode.
Disabled / Enabled 1-255
Repeat
Allows the Repeat Print function to be enabled.
AutoCode data would be repeat printed in AutoPrint
Mode. In Auto-Select Mode, the code could be
repeated a set number of times for a single Print
Trigger.
Disabled / Enabled 1-32000