EasyManuals Logo

Beta RR 50 cc ENDURO User Manual

Beta RR 50 cc ENDURO
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
4
CHECKS AND MAINTENANCE
44
GB
2 mm
WARNING:
The brake fluid is extremely corrosive. Take care not to spill it on the
paintwork.
Wear appropriate protective clothing and protection gloves.
Keep coolant out of reach of children.
WARNING: Avoid any direct contact of the liquid with skin, eyes or clothing.
If this happens:
- with the eyes, rinse immediately with plenty of water and seek medical advice.
- with skin, immediately clean contaminated areas with soap and water. Change
clothing that is contaminated with liquid.
If liquid is swallowed, contact a doctor immediately.
REAR BRAKE LINING CONTROL
To check the wear of the rear brake pads,
visually inspect the caliper from below. The
lining on the visible ends of the two brake
pads should be at least 2 mm thick. Should
the lining be thinner, immediately replace
the brake pads.
Note:
Perform the check according to the times
shown in the table on page 16.
To replace, contact authorised Betamotor
customer service.

Table of Contents

Other manuals for Beta RR 50 cc ENDURO

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Beta RR 50 cc ENDURO and is the answer not in the manual?

Beta RR 50 cc ENDURO Specifications

General IconGeneral
BrandBeta
ModelRR 50 cc ENDURO
CategoryMotorcycle
LanguageEnglish

Related product manuals