EasyManuals Logo

Beta RR 50 cc ENDURO User Manual

Beta RR 50 cc ENDURO
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
2
OPERATION
31
GB
CHECKS BEFORE AND AFTER USE
For safe driving and long vehicle life you should:
1 Check all fluid levels.
2 Check the correct operation of the brakes and brake pad wear (pages 43-45).
3 Check pressure, general condition and thickness of tread (page 48).
4 Check that the spokes are properly tightened.
5 Check the tensioning of the chain (page 49).
6 Check the adjustment and the operation of all the cable controls.
7 Inspect all the nuts and bolts.
8 With the engine running, check the operation of the headlight, the rear and brake
lights, the indicators, the warning lights and the horn.
9 Wash the motorcycle thoroughly after off-road use (page 51).
BREAKING IN
Breaking in takes approximately 500 km/350 miles. During this time:
- Avoid travel at high speeds
- Change speed often so that the parts will break in uniformly and in a shorter time
- Avoid turning the throttle more than 3/4 of the way.
WARNING:
•Aftertherst500km/350miles,changethegearoil.
•Aftertherstoff-roaduse,checkallofthenutsandbolts.

Table of Contents

Other manuals for Beta RR 50 cc ENDURO

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Beta RR 50 cc ENDURO and is the answer not in the manual?

Beta RR 50 cc ENDURO Specifications

General IconGeneral
BrandBeta
ModelRR 50 cc ENDURO
CategoryMotorcycle
LanguageEnglish

Related product manuals