Beyonwiz T3 - Page 53

Volume Key
Volume-unlocked status:
- In TV mode, volume related buttons (Volume +/-, Mute) are only working for TV. - In STB mode, they are only
working for STB.
Volume-locked status:
- Regardless of modes (TV or STB mode), volume related buttons (Volume +/-, Mute) are only working for TV.
How to set Volume-Locked status:
1. Press and hold the STB button more than 3 seconds.
2. If Vol+ button is pressed and then released, STB LED will be turned off and on.
3. Then, press Vol- button and release.
4. Press and release TV button to change the status. Then STB LED lamp will flicker 3 times.
How to set Volume-Unlocked status:
1. Press and hold the STB button more than 3 seconds to enter STB setting mode.
2. If Vol+ button is pressed and then released, STB LED will be turned off and on.
3. Then, press Vol- button and release.
4. Press and release STB button to change the status. Then STB LED lamp will flicker 3 times.
Channel-unlocked status:
- In TV mode, channel related buttons (CH+/-) are only working for TV. - In STB mode, they are only working for
STB.
Channel-locked status:
- Regardless of modes (TV or STB mode), channel related buttons (CH+/-) are only working for STB. How to set
Channel-Locked/Unlocked status (Locked/Unlocked status is toggled each other):
1.
Press and hold the STB button more than 3 seconds to enter STB setting mode.
2. If CH+ button is pressed and then released, STB LED will be turned off and on.
3. Then, press CH- button and release.
4. Press and release OK button to change the status. Then STB LED lamp will flicker 3 times.
Channel Key
48 Remote TV Codes