How to reset Master Power
1. Press and hold the STB button more than 3 seconds to enter STB setting mode.
2. Press and release POWER ( ) button. STB LED lamp will be turned off.
3. Press and release STB button.
4. Press and release POWER ( ) button. Then STB LED lamp will flicker 3 times.
How to set Master Power
1. Press and hold the STB button more than 3 seconds to enter STB setting mode.
2. Press and release POWER ( ) button. STB LED lamp will be turned off.
3. Press and release STB button.
4. Press and release TV button.
5. Press and release POWER ( ) button. Then STB LED lamp will flicker 3 times.
Master Power Reset:
- In TV mode, power button is only working for TV power. - In STB mode, they are only working for
STB power.
Master Power Set:
- Power button is working both for TV and STB power.
Master Power
49 Remote TV Codes
To Next Page
Loading...
